
قامت شركة Google بالإعلان عن خدمتها الجديدة التي أطلقتها وهي بإسم Google Public DNS ، فنحب في البداية تعريف كلمة DNS ، وهي في جهاز الجوال الذي لديك، عندما تريد الاتصال على صديقك، تضغط على اسمه فقط ومن ثم يتم الاتصال به. الذي بحصل هو أن برنامج حفظ الأرقام في جهاز الجوال لا يقوم بتوجيه الاسم (النصي) لشبكة الجوال، بدلاً من ذلك، يوجه رقم المتصل به لأنه يعرف بأن هذا الاسم مربوط بهذا الرقم.
هذا بالضبط هو الـ DNS وما يفعله. هو يعرف بأن اسم الموقع الذي كتبته مربوط برقم IP معين فينتقل إلى الخادم الخاص به ، ومن ثم تعرض محتوياته على شاشة الحاسب امامك. هو يعمل اذا بمثابة قاعدة بيانات من الأسماء والأرقام كبرنامج الأسماء في أجهزتنا الجوالة.
فمثلاً عندما تكتب swalif.net في متصفح الانترنت لديك، يمر الطلب عبر نظام DNS، الذي يقوم بدوره بمعرفة إلى أي رقم IP يعود، وبالتالي الوصول للخادم الصحيح للموقع الذي طلبت، وجلب محتوياته ثم عرضها في شاشة الحاسب أمامك.
كيف يتم الاستعلام بمجرد دخولي للإنترنت؟
دون الحاجة للدخول في التفاصيل التقنية، يتم الأمر عندما تقوم بالاتصال للإنترنت كالتالي:
عندما تقوم بالاتصال بالانترنت، يقوم مزود خدمة الانترنت لديك باعلام (تزويد) جهاز الحاسب الخاص بك برقم الـ DNS الخاص به بشكل اتوماتيكي –> تقوم بكتابة عنوان أحد المواقع للذهاب إليه –> يقوم المتصفح لديك بتحويل العنوان النصي الذي كتبته لخادم الـ DNS الخاص بمزود خدمة الانترنت لديك لمعرفة إلى أي رقم IP يعود –> يقوم المتصفح بعد معرفة الرقم بالتوجه إلى الخادم الخاص به وجلب محتويات الموقع منه وعرضها على شاشة جهاز الحاسب الخاص بك
انتبه!
يجب أن يكون نظام الـ DNS الذي تستخدم موثوق وآمن. لماذا؟ هل رأيت الذي كتبته بالأحمر فوق؟ هذا يعني أنه يمكن لأنظمة DNS الغير موثوقة، أن تقوم مثلاً بتحويلك عند طلبك لموقع البنك إلى خادم آخر لا يخص البنك، و فيه صفحة مطابقة لصفحة البنك التي تعودت على رؤيتها، وبالتالي تدخل معلومات حسابك دون أن تدري أنها صفحة أخرى في خادم آخر ليس لهما علاقة بالبنك!
أذا، ماذا فعلت Google وماهو Google Public DNS؟
يبدو أن قوقل غير مقتنعة بأداء أنظمة الـ DNS الحالية، وتراها بأنها لا تتعامل مع الطلبات التي نقوم بها يومياً بطريقة ذكية وسريعة. قوقل تقول بأن أنظمة الـ DNS الحالية تتعرض بسبب كثرة عمليات الاستعلام التي نقوم بها نحن وغيرنا بتحويلها إليها، لضغط يتسبب في تأخر تمريرها لعدد من طلباتنا، وبالتالي تأخر متصفح الانترنت في عرض المواقع التي نطلب.
من هنا ظهرت بمشروع Google Public DNS، والتي تقول قوقل عنه بأنه أحد ثمرات اهتمامها في النهوض بسرعة الانترنت. يبدو أنها مهتمة بالسرعة إلى درجة البدء من أول نقطة لها علاقة بالأمر، نقطة الاستعلام فور طلبنا لأحد المواقع، قبل الانتقال لسرعة الخوادم نفسها بعد ذلك، وسرعة الاتصال بالانترنت.
تقول Google بأن Google Public DNS أفضل من أنظمة الـ DNS الحالية في التالي:
* أسرع في طلبات الاستعلام (معرفة كل اسم، إلى أي رقم IP يعود) ، وهي الميزة الأهم والتي تلعب الدور الفارق هنا
* أفضل في نظام التخزين Caching
* أكثر أمانا، وأقل عرضة للتخريب
————————–
الآن، كيف أستخدم Google Public DNS إذاً؟
في حال كنت تستخدم نظام Mac OS:
1. اذهب إلى System Preferences
2. اذهب إلى Network
3. اختر طريقة الاتصال الخاصة بك للإنترنت، سواءاً Airport أو Ethernet أو Mobile Broadband في حال كنت تدخل للإنترنت عن طريق الجوال 3G مثلي
4. اضغط على زر Advanced
5. انتقل إلى التبويب DNS
6. احذف مدخلات الـ DNS التي تراها بعد أن تكتبها في ورقة للعودة إليها في حال أردت العودة لها
7. أدخل معلومات نظام Google Public DNS وهي: 8.8.8.8 و 8.8.4.4
8. اضغط Ok ثم Apply
9. ابدأ في تصفح الانترنت ولاحظ الفرق :)
في حال كنت تستخدم Windows:
1. اذهب إلى Control Panel لوحة التحكم
2. اختر Network and Internet
3. اختر Network and Sharing Center، وبعدها اختر Managed network connections
4. اختر طريقة الاتصال الخاصة بك للإنترنت، سواءاً Wireless أو Ethernet أو Mobile Broadband في حال كنت تدخل للإنترنت عن طريق الجوال 3G مثلي. بعدها اضغط بالزر الأيمن عليها واختر Properties
5. اختر التبويب Networking ثم اختر Internet Protocol Version 4 TCP/IPv4 ثم اختر Properties
6. اضغط على Advanced ثم اختر التبويب DNS
7. احذف مدخلات الـ DNS التي تراها بعد أن تكتبها في ورقة للعودة إليها في حال أردت العودة لها
8. ضع علامة “صح” أمام الخيار Use the following DNS server addresses
9. مرة أخرى، احذف مدخلات الـ DNS التي تراها بعد أن تكتبها في ورقة للعودة إليها في حال أردت العودة لها
10. احذف مدخلات الـ DNS التي تراها بعد أن تكتبها في ورقة للعودة إليها في حال أردت العودة له
11. أدخل معلومات نظام Google Public DNS وهي: 8.8.8.8 و 8.8.4.4
12. اضغط Ok
13. ابدأ في تصفح الانترنت ولاحظ الفرق في ذلك.
When you use Google Public DNS, you are changing your DNS "switchboard" operator from your ISP to Google Public DNS.
In most cases, the IP addresses used by your ISP's domain name servers are automatically set by your ISP via the Dynamic Host Configuration Protocol (DHCP). To use Google Public DNS, you need to explicitly change the DNS settings in your operating system or device to use the Google Public DNS IP addresses. The procedure for changing your DNS settings varies according to operating system and version (Windows, Mac or Linux) or the device (computer, phone, or router). We give general procedures here that might not apply for your OS or device; please consult your vendor documentation for authoritative information.
Important: Before you start
Before you change your DNS settings to use Google Public DNS, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.
After changing your settings, if you encounter a problem and cannot connect to the Internet, please call our support numbers for troubleshooting instructions.
We also recommend that you download this page and print it, in the event that you encounter a problem and need to refer to these instructions.
Google Public DNS IP addresses
The Google Public DNS IP addresses are as follows:
* 8.8.8.8
* 8.8.4.4
You can use either number as your primary or secondary DNS server. You can specify both numbers, but do not specify one number as both primary and secondary.
Changing your DNS servers settings
Because the instructions differ between different versions/releases of each operating system, we only give one version as an example. If you need specific instructions for your operating system/version, please consult your vendor's documentation. You may also find answers on our user group.
Many systems allow you to specify multiple DNS servers, to be contacted in a priority order. In the following instructions, we provide steps to specify only the Google Public DNS servers as the primary and secondary servers, to ensure that your setup will correctly use Google Public DNS in all cases.
Microsoft Windows
DNS settings are specified in the TCP/IP Properties window for the selected network connection.
Example: Changing DNS server settings on Microsoft Windows Vista
1. Go the Control Panel.
2. Click Network and Internet, then Network and Sharing Center, then Manage network connections.
3. Select the connection for which you want to configure Google Public DNS. For example:
* To change the settings for an Ethernet connection, right-click Local Area Connection, and click Properties.
* To change the settings for a wireless connection, right-click Wireless Network Connection, and click Properties.
If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
4. Select the Networking tab. Under This connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
5. Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window.
6. Click OK.
7. Select Use the following DNS server addresses. If there are any IP addresses listed in the Preferred DNS server or Alternate DNS server, write them down for future reference.
8. Replace those addresses with the IP addresses of the Google DNS servers: 8.8.8.8 and 8.8.4.4.
9. Restart the connection you selected in step 3.
10. Test that your setup is working correctly; see Testing your new settings below.
11. Repeat the procedure for additional network connections you want to change.
Mac OS X
DNS settings are specified in the Network window.
Example: Changing DNS server settings on Mac OS 10.5
1. From the Apple menu, click System Preferences, then click Network. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. Select the connection for which you want to configure Google Public DNS. For example:
* To change the settings for an Ethernet connection, select Built-In Ethernet, and click Advanced.
* To change the settings for a wireless connection, select Airport, and click Advanced.
3. Select the DNS tab.
4. Click + to replace any listed addresses with, or add, the Google IP addresses at the top of the list: 8.8.8.8 and 8.8.4.4.
5. Click Apply and OK.
6. Test that your setup is working correctly; see Testing your new settings below.
7. Repeat the procedure for additional network connections you want to change.
Linux
In most modern Linux distributions, DNS settings are configured through Network Manager.
Example: Changing DNS server settings on Ubuntu
1. In the System menu, click Preferences, then click Network Connections.
2. Select the connection for which you want to configure Google Public DNS. For example:
* To change the settings for an Ethernet connection, select the Wired tab, then select your network interface in the list. It is usually called eth0.
* To change the settings for a wireless connection, select the Wireless tab, then select the appropriate wireless network.
3. Click Edit, and in the window that appears, select the IPv4 Settings tab.
4. If the selected method is Automatic (DHCP), open the dropdown and select Automatic (DHCP) addresses only instead. If the method is set to something else, do not change it.
5. In the DNS servers field, enter the Google Public DNS IP addresses, separated by a space: 8.8.8.8 8.8.4.4
6. Click Apply to save the change. If you are prompted for a password or confirmation, type the password or provide confirmation.
7. Test that your setup is working correctly; see Testing your new settings below.
8. Repeat the procedure for additional network connections you want to change.
If your distribution doesn't use Network Manager, your DNS settings are specified in /etc/resolv.conf.